Zonescore.

We're still verifying Washington, D.C.'s answers against the District code.

DC zoning › RF-1/CAP

RF-1/CAPRF-1/CAP / Residential Flat Zone

Washington, DC · Title 11 DCMR (2016 Zoning Regulations)

Provide for areas adjacent to the US Capitol precint predominantly developed with attached houses on small lots

Development standards in RF-1/CAP

Maximum height35 ftSubtitle E § 203.2
Maximum stories3Subtitle E § 203.2
Rear setback20 ftSubtitle E § 207.1
Maximum lot coverageSet by structure tier (Table E § 210.1): 60% for Single Household Dwellings and Flats, 60% for Places of Worship, 20% for Public Recreation and Community Centers, 40% for All Other Structures — see Subtitle E § 210.1
Minimum lot sizeSet by type of structure (Table E § 202.1, whole RF family): Row 18 ft / 1,800 sq ft; Semi-detached 30 ft / 3,000 sq ft; All Other Structures 40 ft / 4,000 sq ft — see Subtitle E § 202.1
Minimum lot widthSet by type of structure (Table E § 202.1, whole RF family): Row 18 ft / 1,800 sq ft; Semi-detached 30 ft / 3,000 sq ft; All Other Structures 40 ft / 4,000 sq ft — see Subtitle E § 202.1
Maximum lot coverage, Minimum lot size and Minimum lot width are banded in the ordinance — it depends on what you build or on the lot itself, so no single figure is true for the whole zone. The cited table is the authority; read the tier that matches your intended structure.
Development governed by lot occupancy, not FAR -- and the lot occupancy itself is set by STRUCTURE TYPE rather than one figure for the zone, so no single percentage is served. See the cited table for the tier that applies to what you intend to build.
Read from District of Columbia Zoning Regulations of 2016 (Title 11 DCMR), effective through 2026-04-03. Amendments adopted after that date (most recent 2026-07-17) are not yet reflected.
How complete is this market? Across 134,966 parcels we answer 93.9% of the 6 questions this site is built to answer, each with a source you can check. The rest are shown as “not recorded” rather than filled in — we would rather be short than wrong.

Permitted uses in RF-1/CAP

"Conditional" means the use generally requires a public hearing or special-exception approval — a very different timeline and risk profile from a by-right permit.

This is the zone. What about the parcel?

Zone rules are the starting point — the answer for a specific property also depends on lot size, overlays, existing improvements and site conditions. Run a free address lookup to see what applies to one property.

Look up an address

Sources

Every development standard on this page shows where it came from. Figures cited to a section are quoted from Title 11 DCMR itself and verified word for word against the code text. Figures linked to an official zoning GIS record come from the DC Office of Zoning's own mapped zoning data, which is dated and re-queryable but is a summary of the code rather than the code — where a standard is banded or recently amended, the ordinance text governs. Anything we cannot source is shown as “not recorded” rather than filled in. Use permissions follow Subtitle U.

Other DC zones

ARTS-1 ARTS-2 ARTS-3 ARTS-4 BF-1A BF-1B BF-2A BF-2B BF-2C BF-2D CG-1 CG-2 CG-3 CG-4 CG-5 CG-6 CG-7 D-1 D-1-R D-2 D-3 D-4 D-4-R D-5 D-5-R D-6 D-6-R D-7 D-8 HE-1 HE-2 HE-3 HE-4 MU-1 MU-1/DC MU-10 MU-10/DC MU-10/FT MU-11 MU-12 MU-13 MU-14 MU-2 MU-2/CAP MU-2/DC MU-3 MU-3A MU-3B MU-4 MU-4/CAP MU-4/CAP/CHC MU-4/CHC MU-4/DC MU-4/NO MU-4/RC MU-5 MU-5A MU-5A/DC MU-5A/RC MU-5B