Zonescore.

We're still verifying Washington, D.C.'s answers against the District code.

DC zoning › RF-4

RF-4RF-4 / Residential Flat, Medium Density

Washington, DC · Title 11 DCMR (2016 Zoning Regulations)

The RF-4 zone allows multi-unit flat buildings at medium density, with multiple dwelling units per lot permitted by right. It is found in mixed neighborhoods transitioning between rowhouse and apartment character. Inclusionary Zoning applies to projects with 10 or more units. See the development standards for height and FAR.

Development standards in RF-4

Maximum FAR1.8official zoning GIS record #1104, read 2026-07-03
Maximum height40 ftSubtitle E § 203.2
Maximum stories3Subtitle E § 203.2
Maximum lot coverage60%official zoning GIS record #1089, read 2026-07-03
Rear setback20 ftSubtitle E § 207.1
Minimum lot sizeSet by type of structure (Table E § 202.1, whole RF family): Row 18 ft / 1,800 sq ft; Semi-detached 30 ft / 3,000 sq ft; All Other Structures 40 ft / 4,000 sq ft — see Subtitle E § 202.1
Minimum lot widthSet by type of structure (Table E § 202.1, whole RF family): Row 18 ft / 1,800 sq ft; Semi-detached 30 ft / 3,000 sq ft; All Other Structures 40 ft / 4,000 sq ft — see Subtitle E § 202.1
Figures marked official zoning GIS record come from the jurisdiction's own zoning map layer, not from the text of the code. That record is dated and linked above, and it is a summary of the ordinance rather than the ordinance itself — where a standard is banded or was recently amended, the code text governs. Figures citing a section are quoted from the code directly.
Minimum lot size and Minimum lot width are banded in the ordinance — it depends on what you build or on the lot itself, so no single figure is true for the whole zone. The cited table is the authority; read the tier that matches your intended structure.
By-right FAR varies by building type: All Other Buildings & Structures 1.8
Federal Heights Act (1910) limits apply: 90 ft on residential streets, 110 ft on commercial streets, 130 ft on Pennsylvania Avenue. These federal limits cannot be exceeded by any local zoning approval or PUD.
Read from District of Columbia Zoning Regulations of 2016 (Title 11 DCMR), effective through 2026-04-03. Amendments adopted after that date (most recent 2026-07-17) are not yet reflected.
How complete is this market? Across 134,966 parcels we answer 93.9% of the 6 questions this site is built to answer, each with a source you can check. The rest are shown as “not recorded” rather than filled in — we would rather be short than wrong.

Permitted uses in RF-4

"Conditional" means the use generally requires a public hearing or special-exception approval — a very different timeline and risk profile from a by-right permit.

This is the zone. What about the parcel?

Zone rules are the starting point — the answer for a specific property also depends on lot size, overlays, existing improvements and site conditions. Run a free address lookup to see what applies to one property.

Look up an address

Sources

Every development standard on this page shows where it came from. Figures cited to a section are quoted from Title 11 DCMR itself and verified word for word against the code text. Figures linked to an official zoning GIS record come from the DC Office of Zoning's own mapped zoning data, which is dated and re-queryable but is a summary of the code rather than the code — where a standard is banded or recently amended, the ordinance text governs. Anything we cannot source is shown as “not recorded” rather than filled in. Use permissions follow Subtitle U.

Other DC zones

ARTS-1 ARTS-2 ARTS-3 ARTS-4 BF-1A BF-1B BF-2A BF-2B BF-2C BF-2D CG-1 CG-2 CG-3 CG-4 CG-5 CG-6 CG-7 D-1 D-1-R D-2 D-3 D-4 D-4-R D-5 D-5-R D-6 D-6-R D-7 D-8 HE-1 HE-2 HE-3 HE-4 MU-1 MU-1/DC MU-10 MU-10/DC MU-10/FT MU-11 MU-12 MU-13 MU-14 MU-2 MU-2/CAP MU-2/DC MU-3 MU-3A MU-3B MU-4 MU-4/CAP MU-4/CAP/CHC MU-4/CHC MU-4/DC MU-4/NO MU-4/RC MU-5 MU-5A MU-5A/DC MU-5A/RC MU-5B